Expert Advice to Maintain a Hyundai Car Engine

Information is out of date

When you buy a Hyundai car, it is working with maximum efficiency, the engine is running smooth, and everything just seems perfect. Eventually, as you take your car out on the road to drive, you realize that it requires servicing & maintenance to remain in a good working condition. The engine being the most important part of the car requires some extra maintenance. On the contrary, if one consistently ignores to maintain and service their Hyundai’s engine, their days of searching for a used Hyundai engine for replacement are not far. So, as a car owner, you must be aware of your engine’s working aspects and how to take care of it promptly.

In this article, we’ll go over 5 fluids that experts advice to take care of in order to maintain a Hyundai car engine.

Maintain the Engine Oil Level 

Engine oil is the most prominent element in the maintenance of a car engine. The engine must at all times be at a manufacturer-specified level to avoid mishaps. The engine is responsible for the smooth functioning of an engine. Without the proper quantity of engine oil, the friction inside the engine may likely increase, leading to overheating and engine failure. Especially if you are driving with a used Hyundai engine, you need to take note of your engine oil’s level regularly to keep your engine functioning.

Top Up the Brake Fluid 

The brake fluid level is responsible to keep the brake pedal smoothly integrated with the car engine so that the engine can stop the car immediately when you push the brake pedal. Rigid brake pedal or slow brake response could arise from a low brake fluid level.

Ideally, it should be between the MAX and MIN marks on the side of the reservoir. However:

• If the fluid level is low, top up the fluid so it reaches the MAX level.
• If the fluid level is excessively low, you must have the brake system inspected by an authorized Hyundai service center.

Keep Up the Engine Coolant System

It is quite obvious from the name that the engine coolant system works to cool off the car engine, so the excessive heat does not damage the internal components. Low coolant levels can lead to dire consequences like engine failure. So, whether you have a brand new Hyundai car with a brand-new engine or an older model with a used Hyundai engine, you can always take steps to optimize the coolant system of your car by using a top-notch coolant fluid instead of water.

Maintain the Power Steering

The power steering is another component attached to your engine so wherever it turns the engine can lead your vehicle in that direction. Thus, it requires the power steering fluid to keep functioning without any hindrance. The fluid should ideally be between MAX and MIN marks on the side of the power steering reservoir.

Check the Washer Fluid Level

Washer fluid is another vital fluid necessary for the optimum performance of a Hyundai car engine. You can check the level of washer fluid easily with a quick visual inspection in the washer fluid reservoir and top it up if necessary. Of course, plain water may also be used as an alternative when the washer fluid is not available.

Conclusion

Regular maintenance and servicing of your Hyundai car engine is not a difficult task. Moreover, it is an imperative one as it will avoid serious engine problems from appearing and also help increase the lifespan of your car. By simply following a few manufacturer guidelines, you can keep your Hyundai engine in good shape. Additionally, these tips are not applicable on newly rolled out cars but even classics with used Hyundai engines that can still drive a few thousand miles.