Innovative Fuel Ideas

Information may not be reliable

GAS PRICES ARE ON THE RISE! DON'T HESITATE, BUY NOW!
Look at some of the benefits of the Hydro Cell System… * INCREASE YOUR MPG 25%-60%
* WORKS ON ANY VEHICLE

* REDUCES ENGINE TEMPERATURE
* DOES NOT EFFECT YOUR CAR WARRANTY * PROVEN TECHNOLOGY * NO SAFETY ISSUES
* NO MODIFICATIONS TO YOUR ENGINE

AeolipileThe history of the steam engine stretches back as far as the first century AD; the first recorded rudimentary steam engine being the aeolipile described by Hero of Alexandria.[3] In the following centuries, the few engines known about were essentially experimental devices used by inventors to demonstrate the properties of steam, such as the rudimentary steam turbine device described by Taqi al-Din[4] in 1551 and Giovanni Branca[5] in 1629.

The first practical steam-powered 'engine' was a water pump, developed in 1698 by Thomas Savery. It proved only to have a limited lift height and was prone to boiler explosions, but it still received some use for mines and pumping stations.

The first commercially successful engine did not appear until 1712. Incorporating technologies discovered by Savery and Denis Papin, the atmospheric engine, invented by Thomas Newcomen, paved the way for the Industrial Revolution. Newcomen's engine was relatively inefficient, and in most cases was only used for pumping water. It was mainly employed for draining mine workings at depths hitherto impossible, but also for providing a reusable water supply for driving waterwheels at factories sited away from a suitable 'head'.

Early Watt pumping engine.The next major step occurred when James Watt developed an improved version of Newcomen's engine. Watt's engine used 75% less coal than Newcomen's, and was hence much cheaper to run. Watt proceeded to develop his engine further, modifying it to provide a rotary motion suitable for driving factory machinery. This enabled factories to be sited away from rivers, and further accelerated the pace of the Industrial Revolution.

Newcomen's and Watt's early engines were "atmospheric", meaning that they were powered by the vacuum generated by condensing steam instead of the pressure of expanding steam. Cylinders had to be large, as the only usable force acting on them was atmospheric pressure. Steam was only used to compensate for the atmosphere allowing the piston to move back to its starting position. Even if pressured steam had been available, it could not do any work (push) against the chain connecting the piston to the beam.

Around 1800, Richard Trevithick introduced engines using high-pressure steam. These were much more powerful than previous engines and could be made small enough for transport applications. Thereafter, technological developments and improvements in manufacturing techniques (partly brought about by the adoption of the steam engine as a power source) resulted in the design of more efficient engines that could be smaller, faster, or more powerful, depending on the intended application.

Steam engines remained the dominant source of power well into the 20th century, when advances in the design of electric motors and internal combustion engines gradually resulted in the vast majority of reciprocating steam engines being replaced in commercial usage, and the ascendency of steam turbines in power generation.

We want to Thank You For Visiting Our Website. If You have any Questions please
DONT HESISTATE Visit our Blog Hydro Cell Tx Blog

Home /Buy Here /Services /Contact / Disclaimer/ Facts/More Facts /How ItWorks

Turn Your Ceiling into a MasterPiece let me be Your Painter of Dreams